Minilux Control system

Find product

Minilux control system for movement control

Minilux Control combines several functions in one single module. The unit is set via a display. Used for both outdoor and indoor light control.


Control 36-080

The Minilux Control is not only easy to set; it also has two functions to choose between: outdoors and indoors.

For both the outdoor and indoor functions, the light will be automatically switched on when the movement or presence sensor detects movement, but ONLY if there is not enough daylight.


With the outdoor function the light will not switch off until the timedelay has expired.


With the indoor function the light will switch off as soon as there is sufficient daylight.


The preferred values are set via the display and the push buttons on the front. You can select the lux range for the light sensor, switch on/off values, cutout delay and test mode. You can also read the current light level on the display.

If you use the factory settings (and have positioned the sensors correctly), the control will work as soon as the power is switched on.

You can switch function from automatic on to manual on by connecting a button.

You can also have manual off and on via a button.

  • Energy saving
  • Greater comfort
  • Increased efficiency
  • Anti-theft protection

Movement-controlled lighting control has the benefit of the light only being switched on when it is required. Daylight meets up to 75% of our needs, and it is therefore a waste of resources not to switch the light off when there is sufficient daylight.





Regarding coverage, the new standard for presence detectors in the 700- and 750-series is based on the well-known detector 41-300, which undoubtedly is the most sold detector in Denmark over time. 


With the 700- and 750-detectors you will get long life detectors in a modern design for both flush and surface mounting. The master/slave versions in a number of variants that you can use in almost any room and applications.

SEE portfolio